In aeronautics, air brakes or speedbrakes are a type of flight control surfaces used on an aircraft to increase drag or increase the angle of approach during landing. Air brakes differ from spoilers in that air brakes are designed to increase drag while making little change to lift, whereas spoilers reduce the lift-to-drag ratio and require a higher angle of attack to maintain lift, resulting in a higher stall speed.
The earliest known air brake was developed in 1931 and deployed on the wing support struts.[1] Not long after, air brakes located on the bottom of the wing's trailing edge were developed and became the standard type of aircraft air brake for decades.
In 1936, Hans Jacobs developed self-operating dive brakes, on the upper and lower surface of each wing, for gliders.[2]:108Most early gliders were equipped with spoilers on the wings in order to adjust their angle of descent during approach to landing. More modern gliders use airbrakes which may spoil lift as well as increase drag, dependent on where they are positioned.
Often, characteristics of both spoilers and air brakes are desirable and are combined - most modern airliner jets feature combined spoiler and air brake controls. On landing, the deployment of these spoilers ('lift dumpers') causes a dramatic loss of lift and hence the weight of the aircraft is transferred from the wings to the undercarriage, allowing the wheels to be mechanically braked with much less chance of skidding. In addition, the form drag created by the spoilers directly assists the braking effect. Reverse thrust is also used to help slow the aircraft after landing.
Virtually all jet powered aircraft have an air brake or, in the case of most airliners, lift spoilers that also act as air brakes. Propeller driven aircraft benefit from the natural braking effect of the propeller when the engine is throttled back, but jet powered aircraft have no such innate braking effect and must utilise air brakes to control descent speed.
The earliest known air brake was developed in 1931 and deployed on the wing support struts.[1] Not long after, air brakes located on the bottom of the wing's trailing edge were developed and became the standard type of aircraft air brake for decades.
In 1936, Hans Jacobs developed self-operating dive brakes, on the upper and lower surface of each wing, for gliders.[2]:108Most early gliders were equipped with spoilers on the wings in order to adjust their angle of descent during approach to landing. More modern gliders use airbrakes which may spoil lift as well as increase drag, dependent on where they are positioned.
Often, characteristics of both spoilers and air brakes are desirable and are combined - most modern airliner jets feature combined spoiler and air brake controls. On landing, the deployment of these spoilers ('lift dumpers') causes a dramatic loss of lift and hence the weight of the aircraft is transferred from the wings to the undercarriage, allowing the wheels to be mechanically braked with much less chance of skidding. In addition, the form drag created by the spoilers directly assists the braking effect. Reverse thrust is also used to help slow the aircraft after landing.
Virtually all jet powered aircraft have an air brake or, in the case of most airliners, lift spoilers that also act as air brakes. Propeller driven aircraft benefit from the natural braking effect of the propeller when the engine is throttled back, but jet powered aircraft have no such innate braking effect and must utilise air brakes to control descent speed.
No comments:
Post a Comment